[ 0.000000] Linux version 4.8.2-Gobo (root@lucasvr-private) (gcc version 6.2.0 (GCC) ) #1 SMP PREEMPT Wed Dec 14 20:19:20 GMT 2016 [ 0.000000] Command line: BOOT_IMAGE=/isolinux/kernel initrd=initrd init=/linuxrc ramdisk_size=4096 root=/dev/ram0 brd.rd_nr=32 max_loop=32 Boot=LiveCD vt.default_utf8=1 audit=0 video=LVDS-1:e video=HDMI-1:e video=VGA=1:e [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fe8cbff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fe8cc00-0x000000007fe8ebff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fe8ec00-0x000000007fe90bff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007fe90c00-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Dell Inc. Dimension XPS Gen 3 /0U7084, BIOS A02 08/23/2004 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x7fe8c max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x02ab6000, 0x02ab6fff] PGTABLE [ 0.000000] BRK [0x02ab7000, 0x02ab7fff] PGTABLE [ 0.000000] BRK [0x02ab8000, 0x02ab8fff] PGTABLE [ 0.000000] BRK [0x02ab9000, 0x02ab9fff] PGTABLE [ 0.000000] BRK [0x02aba000, 0x02abafff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7fd21000-0x7fe8bfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FEC00 000014 (v00 DELL ) [ 0.000000] ACPI: RSDT 0x00000000000FCCAB 00003C (v01 DELL XPSGEN3 00000007 ASL 00000061) [ 0.000000] ACPI: FACP 0x00000000000FCCE7 000074 (v01 DELL XPSGEN3 00000007 ASL 00000061) [ 0.000000] ACPI: DSDT 0x00000000FFFC6938 002AEE (v01 DELL dt_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 0x000000007FE8CC00 000040 [ 0.000000] ACPI: SSDT 0x00000000FFFC9563 0000BA (v01 DELL st_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: APIC 0x00000000000FCD5B 000072 (v01 DELL XPSGEN3 00000007 ASL 00000061) [ 0.000000] ACPI: BOOT 0x00000000000FCDCD 000028 (v01 DELL XPSGEN3 00000007 ASL 00000061) [ 0.000000] ACPI: MCFG 0x00000000000FCDF5 00003E (v01 DELL XPSGEN3 00000007 ASL 00000061) [ 0.000000] ACPI: HPET 0x00000000000FCE33 000038 (v01 DELL XPSGEN3 00000007 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fe8bfff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7fd1c000-0x7fd20fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007fe8bfff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fe8bfff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fe8bfff] [ 0.000000] On node 0 totalpages: 523819 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8123 pages used for memmap [ 0.000000] DMA32 zone: 519820 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff88007fa00000 s108120 r8192 d31144 u524288 [ 0.000000] pcpu-alloc: s108120 r8192 d31144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515610 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/isolinux/kernel initrd=initrd init=/linuxrc ramdisk_size=4096 root=/dev/ram0 brd.rd_nr=32 max_loop=32 Boot=LiveCD vt.default_utf8=1 audit=0 video=LVDS-1:e video=HDMI-1:e video=VGA=1:e [ 0.000000] audit: disabled (until reboot) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2032740K/2095276K available (15431K kernel code, 1671K rwdata, 5508K rodata, 1740K init, 1356K bss, 62536K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3391.240 MHz processor [ 0.001017] Calibrating delay loop (skipped), value calculated using timer frequency.. 6782.48 BogoMIPS (lpj=3391240) [ 0.001312] pid_max: default: 32768 minimum: 301 [ 0.002023] ACPI: Core revision 20160422 [ 0.021786] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.022047] Security Framework initialized [ 0.022207] Yama: becoming mindful. [ 0.022371] AppArmor: AppArmor disabled by boot time parameter [ 0.022781] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024029] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.024759] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.024928] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.025460] CPU: Physical Processor ID: 0 [ 0.025619] CPU: Processor Core ID: 0 [ 0.025777] mce: CPU supports 4 MCE banks [ 0.026013] CPU0: Thermal monitoring enabled (TM1) [ 0.026179] process: using mwait in idle threads [ 0.026343] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64 [ 0.026504] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0 [ 0.048923] ftrace: allocating 51557 entries in 202 pages [ 0.067015] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.067183] smpboot: Max logical packages: 4 [ 0.067728] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078000] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz (family: 0xf, model: 0x4, stepping: 0x3) [ 0.078000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.078000] ... version: 0 [ 0.078000] ... bit width: 40 [ 0.078000] ... generic registers: 18 [ 0.078003] ... value mask: 000000ffffffffff [ 0.078160] ... max period: 0000007fffffffff [ 0.078320] ... fixed-purpose events: 0 [ 0.078476] ... event mask: 000000000003ffff [ 0.085066] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.086006] x86: Booted up 1 node, 1 CPUs [ 0.086167] smpboot: Total of 1 processors activated (6782.48 BogoMIPS) [ 0.087314] devtmpfs: initialized [ 0.087569] x86/mm: Memory block size: 128MB [ 0.092152] PM: Registering ACPI NVS region [mem 0x7fe8cc00-0x7fe8ebff] (8192 bytes) [ 0.092526] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.092858] xor: measuring software checksum speed [ 0.103008] prefetch64-sse: 7748.000 MB/sec [ 0.113002] generic_sse: 7856.000 MB/sec [ 0.113159] xor: using function: generic_sse (7856.000 MB/sec) [ 0.113321] pinctrl core: initialized pinctrl subsystem [ 0.113635] RTC time: 15:27:09, date: 12/22/16 [ 0.113914] NET: Registered protocol family 16 [ 0.117009] cpuidle: using governor ladder [ 0.120008] cpuidle: using governor menu [ 0.120166] PCCT header not found. [ 0.120467] Simple Boot Flag at 0x7a set to 0x80 [ 0.120635] ACPI: bus type PCI registered [ 0.120795] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.121053] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.121335] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.121510] PCI: Using configuration type 1 for base access [ 0.135071] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.156008] raid6: sse2x1 gen() 2519 MB/s [ 0.173005] raid6: sse2x1 xor() 1705 MB/s [ 0.190007] raid6: sse2x2 gen() 3757 MB/s [ 0.207003] raid6: sse2x2 xor() 2189 MB/s [ 0.224010] raid6: sse2x4 gen() 3601 MB/s [ 0.241006] raid6: sse2x4 xor() 2187 MB/s [ 0.241164] raid6: using algorithm sse2x2 gen() 3757 MB/s [ 0.241322] raid6: .... xor() 2189 MB/s, rmw enabled [ 0.241481] raid6: using intx1 recovery algorithm [ 0.241749] ACPI: Added _OSI(Module Device) [ 0.241907] ACPI: Added _OSI(Processor Device) [ 0.242002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.242161] ACPI: Added _OSI(Processor Aggregator Device) [ 0.257409] ACPI: Interpreter enabled [ 0.257594] ACPI: (supports S0 S1 S3 S4 S5) [ 0.257751] ACPI: Using IOAPIC for interrupt routing [ 0.258052] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.298299] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.298469] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.298757] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.302140] PCI host bridge to bus 0000:00 [ 0.302301] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.302463] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.302625] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.302907] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.303004] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.303286] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.303455] pci 0000:00:00.0: [8086:2584] type 00 class 0x060000 [ 0.303712] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400 [ 0.303792] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.304136] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.304363] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400 [ 0.304441] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.304591] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.304822] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300 [ 0.304864] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f] [ 0.305036] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.305259] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300 [ 0.305300] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f] [ 0.305467] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.305688] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300 [ 0.305729] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f] [ 0.305895] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.306067] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300 [ 0.306108] pci 0000:00:1d.3: reg 0x20: [io 0xff20-0xff3f] [ 0.306275] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.307073] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320 [ 0.307091] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff] [ 0.307175] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.307372] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.307567] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.308067] pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100 [ 0.308147] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.308432] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO [ 0.308596] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0c00-0c7f [ 0.308759] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 00e0-00ef [ 0.309198] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a [ 0.309211] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7] [ 0.309220] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7] [ 0.309229] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177] [ 0.309238] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377] [ 0.309247] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] [ 0.309267] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.309432] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.309592] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.309753] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.310161] pci 0000:00:1f.2: [8086:2652] type 00 class 0x010601 [ 0.310175] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07] [ 0.310183] pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13] [ 0.310191] pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27] [ 0.310199] pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33] [ 0.310206] pci 0000:00:1f.2: reg 0x20: [io 0xfea0-0xfeaf] [ 0.310215] pci 0000:00:1f.2: reg 0x24: [mem 0xdffffc00-0xdfffffff] [ 0.310248] pci 0000:00:1f.2: PME# supported from D3hot [ 0.310442] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500 [ 0.310494] pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff] [ 0.310783] pci 0000:01:00.0: [14e4:1677] type 00 class 0x020000 [ 0.310810] pci 0000:01:00.0: reg 0x10: [mem 0xdfef0000-0xdfefffff 64bit] [ 0.310944] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.311031] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.311323] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.311485] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.311550] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.311713] pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.311770] pci 0000:03:00.0: [102b:051b] type 00 class 0x030000 [ 0.311785] pci 0000:03:00.0: reg 0x10: [mem 0xde000000-0xdeffffff pref] [ 0.311795] pci 0000:03:00.0: reg 0x14: [mem 0xdfbf4000-0xdfbf7fff] [ 0.311805] pci 0000:03:00.0: reg 0x18: [mem 0xdf000000-0xdf7fffff] [ 0.311838] pci 0000:03:00.0: reg 0x30: [mem 0xdfc00000-0xdfc0ffff pref] [ 0.311917] pci 0000:03:01.0: [1102:0004] type 00 class 0x040100 [ 0.311935] pci 0000:03:01.0: reg 0x10: [io 0xdcc0-0xdcff] [ 0.312020] pci 0000:03:01.0: supports D1 D2 [ 0.312083] pci 0000:03:01.1: [1102:7003] type 00 class 0x098000 [ 0.312099] pci 0000:03:01.1: reg 0x10: [io 0xdcb8-0xdcbf] [ 0.312181] pci 0000:03:01.1: supports D1 D2 [ 0.312242] pci 0000:03:01.2: [1102:4001] type 00 class 0x0c0010 [ 0.312260] pci 0000:03:01.2: reg 0x10: [mem 0xdfbf3000-0xdfbf37ff] [ 0.312271] pci 0000:03:01.2: reg 0x14: [mem 0xdfbf8000-0xdfbfbfff] [ 0.312348] pci 0000:03:01.2: supports D1 D2 [ 0.312350] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot [ 0.312440] pci 0000:03:07.0: [104c:8024] type 00 class 0x0c0010 [ 0.312458] pci 0000:03:07.0: reg 0x10: [mem 0xdfbf3800-0xdfbf3fff] [ 0.312469] pci 0000:03:07.0: reg 0x14: [mem 0xdfbfc000-0xdfbfffff] [ 0.312546] pci 0000:03:07.0: supports D1 D2 [ 0.312548] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot [ 0.312640] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.312804] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.312808] pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdfcfffff] [ 0.312814] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff 64bit pref] [ 0.312816] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.312818] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.312820] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.312822] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode) [ 0.312824] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.321605] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.322567] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.323382] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.324384] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.325370] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.326299] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.327232] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.328147] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.329028] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.329414] vgaarb: setting as boot device: PCI:0000:03:00.0 [ 0.329574] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.329854] vgaarb: loaded [ 0.330003] vgaarb: bridge control possible 0000:03:00.0 [ 0.330479] SCSI subsystem initialized [ 0.331024] libata version 3.00 loaded. [ 0.331057] ACPI: bus type USB registered [ 0.331242] usbcore: registered new interface driver usbfs [ 0.331427] usbcore: registered new interface driver hub [ 0.331606] usbcore: registered new device driver usb [ 0.332032] PCI: Using ACPI for IRQ routing [ 0.338704] PCI: pci_cache_line_size set to 64 bytes [ 0.338722] pci 0000:00:1d.7: can't claim BAR 0 [mem 0xffa80800-0xffa80bff]: no compatible bridge window [ 0.339044] e820: reserve RAM buffer [mem 0x7fe8cc00-0x7fffffff] [ 0.339206] NetLabel: Initializing [ 0.339362] NetLabel: domain hash size = 128 [ 0.339522] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.339700] NetLabel: unlabeled traffic allowed by default [ 0.340178] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.340346] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.340635] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.343028] clocksource: Switched to clocksource hpet [ 0.359269] VFS: Disk quotas dquot_6.6.0 [ 0.359462] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.359760] pnp: PnP ACPI init [ 0.361511] pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] [ 0.361800] pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] [ 0.362150] system 00:00: [io 0x0c00-0x0c7f] has been reserved [ 0.362316] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.362456] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.365189] pnp 00:02: [dma 2] [ 0.365419] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.370522] pnp 00:03: [dma 0 disabled] [ 0.371024] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.373318] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.381127] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.381294] system 00:05: [mem 0x00100000-0x00ffffff] could not be reserved [ 0.381458] system 00:05: [mem 0x01000000-0x7fe8cbff] could not be reserved [ 0.381621] system 00:05: [mem 0x000c0000-0x000fffff] could not be reserved [ 0.381784] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.381947] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.382117] system 00:05: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.382282] system 00:05: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.382445] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved [ 0.382611] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.382770] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.382932] system 00:06: [mem 0xfeda0000-0xfedacfff] has been reserved [ 0.383104] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.383112] pnp: PnP ACPI: found 7 devices [ 0.390615] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.390918] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.390922] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.390931] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.390934] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.390948] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.390951] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.390953] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.390955] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.390957] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.390959] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.390961] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.390963] pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.390971] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.391261] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.391546] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.391708] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.391870] pci 0000:00:1d.7: BAR 0: assigned [mem 0x80400000-0x804003ff] [ 0.392045] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.392210] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.392375] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.392541] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.392826] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.392985] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.393158] pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.393325] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.393612] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.393772] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.393939] pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdfcfffff] [ 0.394111] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff 64bit pref] [ 0.394400] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.394402] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.394404] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.394406] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window] [ 0.394407] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.394409] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.394411] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff] [ 0.394413] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.394415] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.394417] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff] [ 0.394418] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.394420] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.394422] pci_bus 0000:03: resource 1 [mem 0xdf000000-0xdfcfffff] [ 0.394424] pci_bus 0000:03: resource 2 [mem 0xde000000-0xdeffffff 64bit pref] [ 0.394426] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.394427] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.394429] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.394431] pci_bus 0000:03: resource 7 [mem 0x80000000-0xdfffffff window] [ 0.394432] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.394472] NET: Registered protocol family 2 [ 0.394893] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.395254] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.395517] TCP: Hash tables configured (established 16384 bind 16384) [ 0.395741] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.395917] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.396152] NET: Registered protocol family 1 [ 0.398201] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.398479] PCI: CLS 64 bytes, default 64 [ 0.398556] Trying to unpack rootfs image as initramfs... [ 0.398775] rootfs image is not initramfs (junk in compressed archive); looks like an initrd [ 0.400996] Freeing initrd memory: 1452K (ffff88007fd21000 - ffff88007fe8c000) [ 0.401600] Scanning for low memory corruption every 60 seconds [ 0.402292] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.402883] Initialise system trusted keyrings [ 0.404177] workingset: timestamp_bits=40 max_order=19 bucket_order=0 [ 0.407186] zbud: loaded [ 0.408174] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.408480] JFS: nTxBlock = 8192, nTxLock = 65536 [ 0.411896] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 0.415961] Key type big_key registered [ 0.417523] Key type asymmetric registered [ 0.417746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.419084] io scheduler noop registered [ 0.419241] io scheduler deadline registered [ 0.419411] io scheduler cfq registered (default) [ 0.420403] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.420575] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.420737] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 0.420918] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 0.421213] cpcihp_generic: not configured, disabling. [ 0.421390] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.446872] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 0.447200] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.447483] ACPI: Power Button [VBTN] [ 0.447717] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.447997] ACPI: Power Button [PWRF] [ 0.448270] GHES: HEST is not enabled! [ 0.448438] xenfs: not registering filesystem on non-xen platform [ 0.448683] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.469415] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.470306] Linux agpgart interface v0.103 [ 0.470542] [drm] Initialized drm 1.1.0 20060810 [ 0.470720] [drm] amdgpu kernel modesetting enabled. [ 0.470990] Failed to find cpu0 device node [ 0.471153] Unable to detect cache hierarchy from DT for CPU 0 [ 0.510502] brd: module loaded [ 0.550356] loop: module loaded [ 0.550762] Loading iSCSI transport class v2.0-870. [ 0.554178] fnic: Cisco FCoE HBA Driver, ver 1.6.0.21 [ 0.554400] fnic: Successfully Initialized Trace Buffer [ 0.554710] fnic: Successfully Initialized FC_CTLR Trace Buffer [ 0.557031] snic:Cisco SCSI NIC Driver, ver 0.0.1.18 [ 0.558331] iscsi: registered transport (tcp) [ 0.558533] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 0.558693] Detecting Adaptec I2O RAID controllers... [ 0.558916] Adaptec aacraid driver 1.2-1[41066]-ms [ 0.559103] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.559328] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 0.559544] scsi: Detection failed (no card) [ 0.559733] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k. [ 0.560064] iscsi: registered transport (qla4xxx) [ 0.560239] QLogic iSCSI HBA Driver [ 0.560394] Emulex LightPulse Fibre Channel SCSI driver 11.2.0.0. [ 0.560552] Copyright(c) 2004-2016 Emulex. All rights reserved. [ 0.560778] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0 [ 0.561085] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 0.561404] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 0.561588] megasas: 06.811.02.00-rc1 [ 0.561775] mpt3sas version 13.100.00.00 loaded [ 0.562058] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.562265] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 0.562443] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 0.562743] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 0.563047] RocketRAID 3xxx/4xxx Controller driver v1.10.0 [ 0.563285] iscsi: registered transport (be2iscsi) [ 0.563443] In beiscsi_module_init, tt=ffffffff8271b680 [ 0.563646] esas2r: driver will not be loaded because no ATTO esas2r devices were found [ 0.566934] SCSI Media Changer driver v0.25 [ 0.568239] ahci 0000:00:1f.2: version 3.0 [ 0.568564] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode [ 0.568851] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part [ 0.570980] scsi host0: ahci [ 0.572303] scsi host1: ahci [ 0.573592] scsi host2: ahci [ 0.574886] scsi host3: ahci [ 0.575127] ata1: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffd00 irq 20 [ 0.575403] ata2: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffd80 irq 20 [ 0.575680] ata3: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffe00 irq 20 [ 0.575957] ata4: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffe80 irq 20 [ 0.576485] ata_piix 0000:00:1f.1: version 2.13 [ 0.578249] scsi host4: ata_piix [ 0.579564] scsi host5: ata_piix [ 0.579791] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.579951] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.581132] libphy: Fixed MDIO Bus: probed [ 0.581330] thunder-BGX, ver 1.0 [ 0.581532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.581694] ehci-pci: EHCI PCI platform driver [ 0.582089] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.582257] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.582549] ehci-pci 0000:00:1d.7: debug port 1 [ 0.586623] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.586641] ehci-pci 0000:00:1d.7: irq 21, io mem 0x80400000 [ 0.590053] ata6: port disabled--ignoring [ 0.593018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.593249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.593412] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.593689] usb usb1: Product: EHCI Host Controller [ 0.593847] usb usb1: Manufacturer: Linux 4.8.2-Gobo ehci_hcd [ 0.594014] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.594351] hub 1-0:1.0: USB hub found [ 0.594519] hub 1-0:1.0: 8 ports detected [ 0.595000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.595183] ohci-pci: OHCI PCI platform driver [ 0.595361] ohci-platform: OHCI generic platform driver [ 0.595532] uhci_hcd: USB Universal Host Controller Interface driver [ 0.595898] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.596084] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.596392] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 [ 0.596612] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.596776] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.597068] usb usb2: Product: UHCI Host Controller [ 0.597226] usb usb2: Manufacturer: Linux 4.8.2-Gobo uhci_hcd [ 0.597386] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.597700] hub 2-0:1.0: USB hub found [ 0.597862] hub 2-0:1.0: 2 ports detected [ 0.598352] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.598506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.598790] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 [ 0.599000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.599166] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.599428] usb usb3: Product: UHCI Host Controller [ 0.599586] usb usb3: Manufacturer: Linux 4.8.2-Gobo uhci_hcd [ 0.599745] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.600067] hub 3-0:1.0: USB hub found [ 0.600232] hub 3-0:1.0: 2 ports detected [ 0.600712] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.600881] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.601205] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 0.601422] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.601586] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.601867] usb usb4: Product: UHCI Host Controller [ 0.602041] usb usb4: Manufacturer: Linux 4.8.2-Gobo uhci_hcd [ 0.602204] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.602518] hub 4-0:1.0: USB hub found [ 0.602686] hub 4-0:1.0: 2 ports detected [ 0.603193] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.603359] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.603667] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 [ 0.603890] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.604070] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.604351] usb usb5: Product: UHCI Host Controller [ 0.604509] usb usb5: Manufacturer: Linux 4.8.2-Gobo uhci_hcd [ 0.604670] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.604977] hub 5-0:1.0: USB hub found [ 0.605159] hub 5-0:1.0: 2 ports detected [ 0.605520] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 0.605679] Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 0.606000] usbcore: registered new interface driver uas [ 0.606210] usbcore: registered new interface driver usb-storage [ 0.606411] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.609529] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.609743] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.610067] mousedev: PS/2 mouse device common for all mice [ 0.610357] rtc_cmos 00:01: RTC can wake from S4 [ 0.610654] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.610843] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs [ 0.611106] ledtrig-cpu: registered to indicate activity on CPUs [ 0.611290] hidraw: raw HID events driver (C) Jiri Kosina [ 0.611515] usbcore: registered new interface driver usbhid [ 0.611674] usbhid: USB HID core driver [ 0.613114] drop_monitor: Initializing network drop monitor service [ 0.613504] NET: Registered protocol family 10 [ 0.615168] NET: Registered protocol family 17 [ 0.615335] Key type dns_resolver registered [ 0.615821] microcode: sig=0xf43, pf=0x10, revision=0x0 [ 0.616046] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.616514] registered taskstats version 1 [ 0.616673] Loading compiled-in X.509 certificates [ 0.616854] zswap: loaded using pool lzo/zbud [ 0.618524] Btrfs loaded, crc32c=crc32c-generic [ 0.638471] Key type encrypted registered [ 0.639910] Magic number: 12:208:488 [ 0.640162] regulator regulator.0: hash matches [ 0.640365] rtc_cmos 00:01: setting system clock to 2016-12-22 15:27:09 UTC (1482420429) [ 0.641755] PM: Hibernation image not present or could not be loaded. [ 0.765298] ata5.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0D20, max UDMA/33 [ 0.765467] ata5.01: ATAPI: PHILIPS DVD+/-RW DVD8631, GD30, max UDMA/33 [ 0.787180] ata5.00: configured for UDMA/33 [ 0.792176] ata5.01: configured for UDMA/33 [ 0.885264] ata3: SATA link down (SStatus 0 SControl 300) [ 0.885448] ata2: SATA link down (SStatus 0 SControl 300) [ 0.885629] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.886795] ata1.00: ATA-8: TOSHIBA HDWD120, MX4OACF0, max UDMA/133 [ 0.886957] ata1.00: 3907029168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 0.888183] ata1.00: configured for UDMA/133 [ 0.889556] scsi 0:0:0:0: Direct-Access ATA TOSHIBA HDWD120 ACF0 PQ: 0 ANSI: 5 [ 0.893463] ata4: SATA link down (SStatus 0 SControl 300) [ 0.895281] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 0.895566] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.895799] sd 0:0:0:0: [sda] Write Protect is off [ 0.895959] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.895984] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.896226] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.906563] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0D20 PQ: 0 ANSI: 5 [ 0.929479] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 0.929761] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.930176] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 0.930256] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 0.935052] scsi 4:0:1:0: CD-ROM PHILIPS DVD+-RW DVD8631 GD30 PQ: 0 ANSI: 5 [ 0.941312] sda: sda1 sda2 < sda5 > sda3 [ 0.941949] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.960767] sr 4:0:1:0: [sr1] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 0.961215] sr 4:0:1:0: Attached scsi CD-ROM sr1 [ 0.961289] sr 4:0:1:0: Attached scsi generic sg2 type 5 [ 0.961622] RAMDISK: cramfs filesystem found at block 0 [ 0.961785] RAMDISK: Loading 1452KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done. [ 0.973119] VFS: Mounted root (cramfs filesystem) readonly on device 1:0. [ 0.973343] devtmpfs: mounted [ 0.976534] Freeing unused kernel memory: 1740K (ffffffff827a3000 - ffffffff82956000) [ 0.976816] Write protecting the kernel read-only data: 22528k [ 0.977746] Freeing unused kernel memory: 936K (ffff880001f16000 - ffff880002000000) [ 0.980517] Freeing unused kernel memory: 636K (ffff880002561000 - ffff880002600000) [ 1.080024] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 1.119487] random: fast init done [ 1.259036] usb 3-1: New USB device found, idVendor=1532, idProduct=010d [ 1.259199] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.259361] usb 3-1: Product: Razer BlackWidow Ultimate [ 1.259522] usb 3-1: Manufacturer: Razer [ 1.265398] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:1532:010D.0001/input/input4 [ 1.288014] usb 4-2: new low-speed USB device number 2 using uhci_hcd [ 1.299975] ISO 9660 Extensions: RRIP_1991A [ 1.317185] hid-generic 0003:1532:010D.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.1-1/input0 [ 1.325144] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:1532:010D.0002/input/input5 [ 1.377064] hid-generic 0003:1532:010D.0002: input,hidraw1: USB HID v1.11 Device [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.1-1/input1 [ 1.382099] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2/0003:1532:010D.0003/input/input6 [ 1.382471] hid-generic 0003:1532:010D.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.1-1/input2 [ 1.440016] tsc: Refined TSC clocksource calibration: 3391.499 MHz [ 1.440179] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e2f03b79d, max_idle_ns: 440795353658 ns [ 1.453446] usb 4-2: New USB device found, idVendor=046d, idProduct=c018 [ 1.453597] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.453748] usb 4-2: Product: USB Optical Mouse [ 1.453893] usb 4-2: Manufacturer: Logitech [ 1.468758] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:046D:C018.0004/input/input7 [ 1.469144] hid-generic 0003:046D:C018.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2/input0 [ 2.448051] clocksource: Switched to clocksource tsc [ 3.806283] random: crng init done [ 24.717850] udevd[510]: starting version 3.2 [ 26.173959] udevd[511]: starting eudev-3.2 [ 29.799649] pps_core: LinuxPPS API ver. 1 registered [ 29.799697] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 30.056111] Floppy drive(s): fd0 is 1.44M [ 30.069977] FDC 0 is a post-1991 82077 [ 30.182843] PTP clock support registered [ 30.187544] parport_pc 00:03: reported by Plug and Play ACPI [ 30.187666] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 32.008688] intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. [ 32.296907] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 32.483495] tg3.c:v3.137 (May 11, 2014) [ 32.495153] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:13:20:3e:45:3b [ 32.495209] tg3 0000:01:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 32.495260] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 32.495541] tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 33.498908] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 33.785443] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 33.845040] firewire_ohci 0000:03:01.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 33.897050] firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x2 [ 33.927962] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20160422/utaddress-255) [ 33.929457] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20160422/utaddress-255) [ 33.929930] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20160422/utaddress-255) [ 33.934276] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 33.934611] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 33.947135] gameport gameport0: EMU10K1 is pci0000:03:01.1/gameport0, io 0xdcb8, speed 924kHz [ 34.352130] firewire_core 0000:03:01.2: created device fw0: GUID 00023c0191048348, S400 [ 34.400091] firewire_core 0000:03:07.0: created device fw1: GUID 802013003b453e00, S400 [ 47.213218] Uniform Multi-Platform E-IDE driver [ 51.773502] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 52.480446] intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. [ 53.802787] intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. [ 57.613698] ppdev: user-space parallel port driver [ 58.658103] gpio_ich: ACPI BAR is unavailable, GPI 0 - 15 unavailable [ 58.658590] gpio_ich: GPIO from 462 to 511 on gpio_ich [ 59.640378] iTCO_vendor_support: vendor-support=0 [ 59.643077] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 59.643295] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860) [ 59.644518] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 60.580984] intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. [ 60.618996] udevd[522]: Error changing net interface name eth0 to enp1s0: No such device [ 60.619323] udevd[522]: could not rename interface '3' from 'eth0' to 'enp1s0': No such device [ 60.637783] tg3.c:v3.137 (May 11, 2014) [ 60.654097] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:13:20:3e:45:3b [ 60.654390] tg3 0000:01:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 60.654676] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 60.654957] tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 60.754823] snd_emu10k1 0000:03:01.0: Installing spdif_bug patch: SB Audigy 2 [SB0350b] [ 67.491309] fuse init (API version 7.25) [ 68.046023] blk_update_request: I/O error, dev fd0, sector 0 [ 68.046175] floppy: error -5 while reading block 0 [ 68.071021] blk_update_request: I/O error, dev fd0, sector 0 [ 68.071182] floppy: error -5 while reading block 0 [ 68.143471] Adding 2094076k swap on /System/Kernel/Devices/sda5. Priority:-1 extents:1 across:2094076k FS [ 113.862146] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 115.505238] tg3 0000:01:00.0 eth0: Link is up at 100 Mbps, full duplex [ 115.505290] tg3 0000:01:00.0 eth0: Flow control is on for TX and on for RX [ 115.505354] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 146.555562] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)